How To Use
Instructions: The User must ensure that they comply with the following instructions before using the Magic wand:
(1) The magic flash paper may be wet on arrival. Please spread the paper out and allow it to air dry. Do not use it until it is completely dry. Store the flash paper in a cool area. Keep it away from heat, flames or strong light. Avoid contact with metal objects, it can cause them to rust.
(2) Turn the power switch off before filling the Magic Wand with flash paper.
(3) Tear the flash paper into a 5cm x 5cm piece, nothing more.
(4) Roll it into a cylinder shape around 2cm long. Don't make the roll too thin, otherwise it won't travel as far.
(5) Place the roll into the Magic Wand's opening.
(6) Push the flash paper down the Magic Wand using the metal piece provided.
(7) Read all disclaimers before use. Then you can turn on the power switch and have fun!
Disclaimers: The User must ensure that they comply with the following disclaimers before using the Magic wand:
(8) Do not hold the wand in-between your arm whilst filling the wand with flash paper. Do not fill the wand with flash paper whilst not in use.
(9) When filling the wand with flash paper do not point the flame vent at yourself. Do not insert sharp tools into the opening of the Magic Wand since it can cause damage to the tungsten wire.
(10) Our Wand is a professional magic prop, not a toy for children. It is strictly for adults aged 18 or over. Do not shoot near or at any flammable products or materials such as gasoline. Do not shoot near or at humans or animals.
(11) Warning: Due to being a product of ignition, this product may explode if used incorrectly and cause moderate to severe injuries. You must ensure that you NEVER block the flame vent (the opening of the wand) whilst holding down the shooting button as this risks the chance of an explosion occurring. Any injuries that arise due to ignoring this warning and instruction will not be compensated and we cannot be held liable.
(12) Only use the flash paper provided by us and not by any other merchant.
(13) Do not attempt to use any other consumables with the wand.
(14) Do not leave flash paper in the wand whilst not in use.
(15) Do not leave flash paper in the wand whilst it is charging.
(16) Make sure the wand is turned off before inserting flash paper.
(17) Do not hold the opening of the wand at any point in time.
(18) When inserting flash paper into the wand, do not hold the opening of the wand or press down on the shooting button.
(19) Do not use the wand in extreme conditions such as areas of water ingress, high temperatures or high pressure.
(20) When using the wand, hold down on the shooting button for a maximum of 1-2 seconds. Anything longer may cause damage to the tungsten wire.
(21) For your safety, please use the wand strictly in accordance to the safety guidelines. We will not be responsible or liable for any damage or harm caused by non-compliance.